Very straight and overall solid rear tail panel, with or without the rear trunk ledge and frame mounting brace. The only rust it has is just a tiny spot on the ledge of the channel on the left side and some on the right side. Photos shows it, rest is fine. If you want just the tail panel $175.00 it would be removed from the trunk ledge from the spot welds along with the sides where it meets the quarter panels. If you want the full piece with frame mounting support brace, ledge and tail panel, its 300.00, it will be cut about 2 inches from the very bottom of the trunk pan before it curve up. Shipping Fed Ex is 100.00 as whole or just the tail panel would be 50.00. I take Paypal as sales, Joe 602-298-7090 Glendale,Az
SOLD I do have an extra rear upper trunk section that the tail panel mounts too for 100.00(first few photos) and the brace under it that the rear frame mounts to for 75.00 plus shipping. Rust free parts.
Interested in the brace in the last two pics that that mounts to the frame only. Depending on shipping costs to NC 27030.
Shipping Fed Ex ground 37.01 and Priority Mail was 38.60, I get a small break when I ship thru Paypal so take off $5.00.
