1970 "0240" qjets

Discussion in 'Parts for sale' started by hugger, Apr 26, 2020.

  1. hugger

    hugger Well-Known Member

    750 cfm both are blasted and ready to assemble,..$150 shipped for both or $250 each rebuilt
    20200426_185812.jpg
     
  2. sobair1

    sobair1 Well-Known Member

    Interested, what are the build date codes on the bodies?
     
  3. BrianTrick

    BrianTrick Brian Trick

    Also interested and what dates?
     
  4. C.Rob

    C.Rob Well-Known Member

    What do you like for a media to blast them with?
     
  5. hugger

    hugger Well-Known Member

    Powdered glass
     
  6. hugger

    hugger Well-Known Member

    Md 3249
    Md1929

    Frozen up
    Md2049

    I assume this the correct #s Ive never been a numbers chaser
     
    Last edited: May 4, 2020
  7. sobair1

    sobair1 Well-Known Member

    Thanks Ethan, what does it take to unfreeze a carb? Are the frozen ones rebuildable? thanks
     
    Last edited: Apr 26, 2020
  8. BrianTrick

    BrianTrick Brian Trick

    Interested in the 1929 and the 2049.
     
  9. hugger

    hugger Well-Known Member

    I'd probably just drop it in a bucket trans fluid and acetone and forget about for a week
     
  10. sobair1

    sobair1 Well-Known Member

    Ethan, I am interested in the ones that Brian is not interested in. If you don’t mind breaking these up, I think this can work for both of us.
    How much for the two, $150?
     
  11. hugger

    hugger Well-Known Member

    I'll do $45 on the frozen ones,..so I think you each want one frozen one correct?

    As to whether or not the frozen ones are able to be put back in service as a whole I'm not sure,..depends on how they look once broken down,..I'll pull the top plates off and take a look,..the base plates may need to be replaced but Mark,.Ken,.Gregg ..or Cliff will have some I'm sure
     
  12. sobair1

    sobair1 Well-Known Member

    Yes Ethan I am interested in both md3249 and md o330
     
  13. sobair1

    sobair1 Well-Known Member

    Thanks again Ethan. Check going in the mail in the next day or two.
    Were you able to pull the top plate off and have a look at the one that I wanted?
     
  14. hugger

    hugger Well-Known Member

    I will here shortly
     
  15. sobair1

    sobair1 Well-Known Member

    Hope it’s rebuildable, money in the mail. Please let me know! Thanks
     
  16. hugger

    hugger Well-Known Member

    I'll pull the lid tomorrow I forgot
     
  17. hugger

    hugger Well-Known Member

    Both of the frozen ones are disassembled,..castings are in good shape,..bowls are pit free

    Primaries are frozen but should come free with a good soak

    Inlet threads are a little weak will need the oversize fittings an should be fine worst case rethreaded which most all builders can do
     
  18. sobair1

    sobair1 Well-Known Member

    Thanks Ethan. PM sent
     
  19. hugger

    hugger Well-Known Member

    3 available,...
     
    Last edited: May 4, 2020
  20. hugger

    hugger Well-Known Member

    Will have the MD 1929 rebuilt and ready to ship out by Fri
     

Share This Page