I am parting a 68 Riviera. the engine and trans as well as the doors and fenders are spoken for but everything else is available. nice black dash, aluminum front drums, front wheel mouldings, set of four chrome road wheels. car is rough but has lots of trim and small parts. steve schmidt compedgemarine@windstream.net
here are some pictures of the riv. as you can see it had a hard life. lots of trim and such. hate to send all of it to the scrap so if you see anything or are looking for something let me know. steve compedgemarine@windstream.net
Id like the wheel well moldings if they are straight and dent free. I can buff them out but not remove dents.
here is a pic of the front mouldings. there are a couple of very small dings in each that would not show up in a picture. the right rear is junk, I will have to look at the left rear tomorrow.
wildcat, I will pull the speaker grill this weekend and get a picture of it. it does not look bad but I will know for sure after it is out. briz, yes I should be able to get the drip rail off with out a problem, I do it all the time at work. I looked at the left rear wheel moulding and there are a couple of small dings in it. noticable but could probably be removed without too much effort, I have fixed far worse. as I said the fronts have just a couple very small spots that are hard to notice. thanks steve
Thanks, When you take the pics, can you have a ruler/measuring tape in the pic? I'm interested if the price is in my range. Jon
some pictures of the parts I have off drip rail mouldings, they came off fine, I dont see any damage anywhere nice black dash pad, the vents are stuck but the pad looks real nice complete grill, it is warped and there are a few cracks but there are no missing parts and all the studs are good nice tail lights, one is perfect, one has a faint craze line at one end, rough center console, cracked on one side and barn door hinge screwed on the storage door. better than nothing if you need one. gauge cluster, no cracks or damage and lenses are clear but printed circuit board is bad (mouse)
still learning how to attach pictures. here are a couple more here is the speaker grill. the mount is rusty but should clean up. the grill looks ok and the chrome is not bad with the normal age and light pitting but would clean up fine for a driver. it is 10" wide and 8.5" tall. backup lights and tag light. one back up is clear the other shows some crazing
What's your price? Shipping to N2L 3G1 Canada (University of Waterloo)? Does the screen have any dents in it? Does it look like it's possible to switch the Riviera symbol for the one from my Wildcat? (Mine's still in the seats so I can't tell. I don't mind doing a bit of work)
Kack, looks like the shift indicator is in a box bolted to the bottom of the intrument panel, I assume that is what you need. do you also need the hook piece that is on the steering column that the link hooks on? steve
wiper arms, look nice but the pass. side blade frame has a kink in one spot washer bottle, yellowed but in nice condition front turn signals, chrome is nice for a driver, couple of small pits, lenses are showing some crazing rear side panels, nice for a driver but need cleaning, no rips and not bad for their age
Kack, is this the indicator you need? I need to pull off the mount on the column but I do have it. if so how about $10 plus the shipping. I would need a postal code to figure shipping. let me know. thanks steve
Steve, i will buy. Shipping to: 57395 Tranas Sweden. Thanks Goran ---------- Post added at 04:58 AM ---------- Previous post was at 04:30 AM ---------- Steve, whats in the picture is all i need. Dont need the hook on the column. Thanks Goran
Kack, looks like the best price on shipping is First-Class Mail International Parcel with the US post office at $12. it does not say how long it takes to get there so if you need it quick let me know but priority runs about $35 so quite a difference. thanks steve