1967 GS400 hardtop part out

Discussion in 'Car Part-Outs' started by priariecanary, Nov 13, 2016.

  1. priariecanary

    priariecanary Stacey

    Yes I still have the vinyl top trim. Like a dummy I messed up the very end of one piece when cutting the roof off. Other than that and needing a good polish they are in great shape. If you are still interested I can post photos this weekend. $10 plus actual shipping cost.
     
  2. cobra2

    cobra2 Well-Known Member

    Interested in the steering wheel and heater control knobs if any good.
     
  3. 70buickboy

    70buickboy Well-Known Member

    Price is great, would like to see pic's , i'm getting these for a friend and he's kinda fussy.... he's missing the corner piece on drivers side, but would really like a matched set...
    Thanks
    Mike
     
  4. priariecanary

    priariecanary Stacey

    Heater control were sold with the rest of the AC system. The steering wheel that came with the car was a disaster but I have another decent wheel that I will post pictures of.
     
  5. priariecanary

    priariecanary Stacey

    Photos of the vinyl top trim are below including a close up of the end of the inner left side piece that I boogered up with the grinder. The last photo shows a section that I polished for about 30 seconds. It looks like they will clean up nicely. fasteners included.
    IMG_0403.jpg IMG_0404.jpg IMG_0405.jpg IMG_0406.jpg
     
  6. priariecanary

    priariecanary Stacey

    Here are 2 steering wheels that I have. I have one horn pad that will go with whichever wheel you want.

    First set of photos is the wheel that came with the parts car. Its cracked in all the normal places. You could use it as or try and repair yourself.
    IMG_0394.jpg IMG_0395.jpg IMG_0396.jpg


    This set of photos is of the wheel that came with my convertible. the previous owner tried to do some crack-filling and repairs himself. Its cracked again but is in better shape than the wheel from the parts car. There are no visible cracks on the rim.
    IMG_0397.jpg IMG_0398.jpg IMG_0399.jpg

    I will include the horn pad in the photos below with either steering wheel. There are a few blemishes on the chrome surround and the trim-shield emblems are a bit faded. Horn wiring is intact and uncut.
    IMG_0401.jpg IMG_0402.jpg

    How about $40 for the steering wheel from the parts car or $50 for the other, slightly nicer one - plus shipping. Crazy people on eBay are asking $75 for these right now.
     
    Last edited: Jan 6, 2018
  7. 70buickboy

    70buickboy Well-Known Member

    That little hic-cup is on the drivers side, yes ? If so , I'm gonna hafta pass... That's the piece he's missing.
     
  8. cobra2

    cobra2 Well-Known Member


    Stacey I am sorry I lost this post somehow do you still have the better steering wheel and horn pad I will take if you do..
     
  9. priariecanary

    priariecanary Stacey

    Yes, I still have it. Please PM your zip and I will figure out shipping cost.
     
  10. cobra2

    cobra2 Well-Known Member

    Ok Thanks I PM you
     
  11. Troy A. Tils

    Troy A. Tils New Member

    20180211_124531.jpg I am in need of the chrome trim that goes along the bottom of the driverside rear window.
     
  12. priariecanary

    priariecanary Stacey

    That trim (I think it's called reveal molding) was optional on '67 Skylarks and GS400. My parts car didn't have that option. Sorry.
     
  13. Troy A. Tils

    Troy A. Tils New Member


    Know of any other options I might try?
     
  14. Troy A. Tils

    Troy A. Tils New Member

    Know of any other optons I might try?
     
  15. Chi-Town67

    Chi-Town67 Gold Level Contributor

    Try looking for '66-'67 GTO or LeMans belt reveal moldings. They are all the same.

    Also post what your looking for in the "parts wanted" forum here. Someone may have what you need.
     
  16. Ken keefe

    Ken keefe Buick Strong

    looking for a nice driver side rear tail light bezel. any available?
     

Share This Page