1967 Buick GS400 hardtop part out. I posted a lead on this car before I bought and had it towed home. Link to original post is below: http://www.v8buick.com/showthread.php?315612-1967-GS400-part-out&highlight= Car has been sitting outside since the 1980s so the body and frame are pretty much shot. It is located near Stillwater, MN Post needs here and I will get back to you as soon as I can with photos and price for anything that is not listed. I travel for work so might not be able to reply right away. Be patient, I will get back to you. All prices listed are without shipping. I am keeping the following items for the car, I may sell some of this stuff later but will post a separate ad for them if I do. Engine including heads and crank Door panels Remote mirror Power window wire harnesses, motors, and regulators Console AC vents Fan shroud (It's a miracle! I finally found one!) Battery tray Steel wheels Front bumper Hood scoops Tilt steering column Switch pitch automatic transmission Seat belts Parts that were missing before I bought the car: Antenna Front seats GS Grill Carburetor Starwars aircleaner Radiator Parts that are no good due to rust: Trunk lid Fenders and quarter panels Fuel tank Rear bumper It may be possible to cut some patch panels out of the body but all of the places that usually need patching are already rusty. If you have something in particular you are looking for, just ask and I will see what I can find. Engine parts for sale Both valve covers - $60 engine mounts Transmission crossmember Suspension parts for sale front brakes sway bar a-arms - $20 each Positraction rear end - $250 Interior parts for sale Rear seat- Upholstery is shot. Includes seat base and back. $100 Instrument panel (no clock) Glovebox door - $10 Front armrest bases - some cracks but should be reparable, will need replating. $40 for the pair Dash pad core - $50 Rear armrest bases - $40 for both Rear seat filler panels - $20 for both 1 good GS 400 door panel emblem in fair shape. Has two visible cracks. - $10 Glass Driver and passenger door and quarter glass, plus rear window. 5 pieces total. All are soft-ray glass. Drivers door class has a chip. $300 for all. I prefer to sell as a set. vent windows - $85 for both Body panels Hood (without scoops) Good condition, Missing "I" in the Buick text on the front. Has a small dent on the driver's side of the nose and two high points near the scoops. Has spots of surface rust but otherwise in good shape - $400 Core support - Looks good so far, area under battery is solid. Trim for sale Wheel well trim - $425 for all 4 corners. Vinyl top trim Rear fender GS Emblems, one side only. pretty crusty and need paint, $10 Rear trunk trim - appears to be intact and in one piece but is pretty heavily pitted - $40 Headlight doors - $80 Ventiports/Fender gills - $50 for both Wheel houses - condition TBD Front bumper brackets - $75 for both sides Misc. Hood hinges - $50 for the pair Hood latch - $40 If you need something that isn't listed, post here and I will see if I have it and can post photos. Several people posted responses to the lead on this car before I bought it. Those people are in line for the parts they asked about until they decide if they are in or out. OK? Please post here if still interested. Chuck Nixon - hood and AC parts - Out, not interested Joe M. (Mr. Sunset) - door badge and bumper brackets - Out, not interested Ed Green (NZ GS 400) - side and rear glass - Out, not interested Go Kitty - Are you interested in the wheel well moldings? - Out, not interested Rhett (Bigpig455) - Pass through plate for shifter rods (Not sure what you are looking for but I will take a look after I get the console off) John (Grum.Man) - Upper radiator support - are you looking for the top plate for the radiator?
Stacey, you have a PM and I will pass on the hood and A/C parts. In line for the stabilizer bar, Thanks, Chuck
Hi Stacey, May I please see some pics of the glass? Thanks. I will PM you my email address if you want to send the pics that way. P.S. Your mailbox is full.
Hi Stacey, I already bought a set of door badges. to much $ for me on the front bumper mounts. only need one really and not immediately. I'll pass
Thanks Stacey - You'll see what I mean when the console comes out-its screwed to the floor. PM me when you get to it please, as I might miss your response here.
I'm interested in the wheel well molding. Of course I only need the bottom piece of the front right wheel but understand you may not want to break them up. Im also interested in the headlight switch seat (if that makes sense). Not the knob that you pull out, but what it sits in when it's pushed in. (Mine is stripped.) Thanks
Photos of the glass are below. There are some fine hazy scratches on the rear window, shown in the 5th photo. I plan to use the driver's door glass to replace the driver's door glass in my convertible. The driver's door glass in my convertible is in good shape but has a small stone chip located near the top. Photos of that piece of glass are below. The stone chip is the white spot near the top of the steering wheel in the first photo. The chip is about 3/16 of an inch in diameter, closeup is in the second photo Ed - I will sell you the passenger door and quarter windows, driver side quarter window, and rear window from the parts car and include the door glass from my convertible for free, after I swap the driver's door glass from the parts car into my car. Let me know if you are interested.
Tom - the wheel well moldings on the car are the 2-piece type, not the 4-piece type that has the stainless part on the lower part of the fender, between the wheel well and the front bumper. If you are interested in just the front moldings of the 2-piece type, I have an extra set of fronts only that are all polished and ready to go. Otherwise photos of the moldings on the parts car are in the next post. Let me know if you are interested in the polished fronts only and I will let you have them for what I am into them for. Photo is below.
Photos of wheel well moldings from parts car are below. They are in great shape, just need polishing. As noted in last post, the fronts are the 2-piece type. I will post more photos when I get them off the car. Not sure why the photos below got attached, I can't seem to get rid of them.
Is the the thing you are looking for the ring that is the center of the photo below? it's screws into the headlight switch. The one I have probably needs replating but is otherwise OK. $2 plus shipping. I need to charge something so I can convince my wife this boondoggle is a money-making enterprise and not another excuse to by more Buick Junk.
Make an offer on the bumper brackets - I don't need them. Rather see you have them than the junk yard.
Top plate for radiator is below. It's correct for the heavy duty radiator on a big block car but is missing one of the rubber pads. $15.
did you sell all the knobs on the dash?headlight,wiper,cigarette lighter?radio available with knobs??
All the knobs are still available. Ernie Price may want the bezel for the headlight switch. You looking for the whole radio or just the radio knobs? I would prefer to sell the entire radio, knobs included. It's an AM-only sonomatic. Please PM if interested, I can post photos.
Ernie - Please let me know if you want the headlight switch bezel thing. I prefer to sell the entire set of wheel well moldings all together. Ziggy is next in line for them (pending better photos) if you aren't interested in the whole set.
