I have a 1965 Skylark 2 door hardtop rolling frame that I was using as part of a restoration project that turned out to be too far gone. The frame is not boxed in. It has been powdercoated, as I wanted to rust proof it against the humidity here in the South. No rust damage, very straight frame. I have installed tubular A-arms, Ridetech 1.5" lowering springs, KYB shocks, 2 piston disc brakes, and polyurethane bushings on the rear suspension. Comes rolling on 14" plain steel wheels and tires. Asking $1.000 for the complete setup. Let me know if you have any additional questions. Thanks for your interest.
Do you have aftermarket sway bars with it? Do you have boxed upper and lower rear control arms? Where did the disc brakes come from?
No aftermarket sway bars. Just the factory ones currently. The control arms are the factory open ended ones but I did swap out to poly bushings on those, the disc brakes are a standard 68 Camaro disc brake setup. The rear brakes are still drums. I have the shoes and the rebuild kits for them just hadn’t put them together yet.