Was lucky and found a set of ported Stage 2 Te heads from a well known member of the Buick community. I don’t have a flow sheet, but assuming they...
Looking for an early period correct B4B for a factory stage 2 setup. John jr 914 469 8617
SOLD For sale new 470 stage2 Scott brown TE heads.New TA 1.65 roller rockers. TA SPX intake extensive porting. bullet hydraulic roller cam with...
Several months ago a set of damaged Stage2 heads came up for sale and I thought seriously about buying them. I decided not to and just wait for a...
I have for sake a set of Stage 2 emblems that I am letting go after going different direction on stage 2 project. $100. Will deliver to BG. [ATTACH]
I have had these for many years and do not have any history on them other than "they found me" and I picked them up. They are very nice and...
I made these for myself and a couple friends a while back. They're a pvc type material with a thin aluminum sheet on both sides which is...
Now that we have Ken Montour's high powered ,STAGE 2, Aluminum block 530" up and running. We figured we needed a decent hood scoop to supply air...
Looking for a set of 2" Stage 2 headers. Let me know what you have. Thanks,
I'm looking for an original Buick 455 Stage 2 camshaft. Pleae PM me if you have one you want to sell.
Trying to get things I need for the Supercharged motor to be ready for the spring thrash. Motor currently has a MSD HVCII coil,planning on a MSD...
Any real world experience with taking the d port on the exhaust side to to full round port increasing the size substantially?..I hear on large...
I have an 1968 8.2 rear end from a gs 400. It has a set of 478 gears in it. It looks good and operated well in the car before being removed....
Buick Brethren! I have been hoarding parts for a short while now, but my race Buick build is taking another step forward and I am looking for a...
Buick Brethren - I feel I have a decent understanding of the Stage 2 option and rarity - dealer option only which included an aluminum intake,...
Has anyone in the past seen exhaust manifolds like this one? I recently acquired this "one" RH Stage 2 cast iron exhaust manifold. It's "raw as...
I have a friend who has some original stage 2 heads. Inquiring what they might be worth?
Hello, I have a 1967 Skylark that I am building a 1972 Buick 455 for. I am in the planning part of the build and don't want to make too many...
A local Buick enthusiast has an 86 Regal with a 455, and he wants to install some Stage 2 heads/headers. Can this be done with the motor in the...
I thought i saw it but I cant find it now, Whats everyone running for boot angles on stage 2 heads? a nice clean looking setup maybe with the TA...