*******Sale Canceled*****For Sale Competition Cams 268H Cam Shaft for 400, 430, 455 Big Block Buicks. This cam is in its original box. Specs are...
[MEDIA] Found this bad ass GSX on YT. Says he has it all stock except for the cam, TH400, longtube headers and a H-pipe with 3 inch exhaust all...
Came across this video on Youtube: [MEDIA] It's a 440, unsure if it's bored and has open headers, but it sounds mean as hell! And it's not just...
Currently running a stock 455 with eldobrock intake and holley sniper TH400 transmission, 3:42 gear. I was wanting to change the camshaft to...
Hey guys. I’m thinking of doing a cam, intake, carb, headers and exhaust on my 1973 Boat tail Rivvy. Just looking to wake up the old girl and...
Hey guys, we’ve recently gotten a 69 Skylark with a stock as far as I know 350/th350. It does have the iron 4bbl intake. According to the specs,...
Good morning. While installing my Crower 50256 cam last night I noticed the front bearing was very tight. I was able to coax the cam into...
I’m sure there’s dozens of threads with this same subject, but each engine and application is different. I have built more engines than I care to...
SOLD ******** Factory overstock, never used Stage 1 455 cam # 1-1383853. Still in the factory wrapping and box. Note, the white in the picture...
Hi ever one I have just done a 430 rebuild and installed a bigger cam. http://www.taperformance.com/proddetail.asp?prod=TA_212-455&cat=153 Now...
Hey everyone! I don't post much but when I do I ask for advice and tips to help me build up my BBB. You guys are very helpful and I deeply...
Back when I owned my '70 GS 455, I bought several parts from TA Performance. I never got around to installing the parts before I sold the car....
Hello all! Another new guy here, begging for validation or recommendations... here's what I've got. Let's start about 15 years ago. My dad had...
http://www.ebay.com/itm/131017790623?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
What is a good slightly bigger than stock cam I can put in a 1963 401 without having to change lifters or push rods?is it possible? I want the...
i recently ran into a couple of problems with my newly rebuilt 350. low compression and low vaccum in had because after i took my heads to get a...
Piston and cam choice for 455 build - Done! Now with parts list Rebuilding the engine for my '73 Riv. Looking for good power and streetability....
I bought a 455 short block off of a member and I want to understand some basics that I don't understand. It is a 462/0.030 block, forged TA...