1967 GS400 hardtop part out

Discussion in 'Car Part-Outs' started by priariecanary, Nov 13, 2016.

  1. staged67gspwr

    staged67gspwr "The Black Widow"

    Is the fusebox for sale??
     
  2. 12lives

    12lives Control the controllable, let the rest go

    In line for the top plate for the radiator. Did it sell?
     
  3. Ant Legrand

    Ant Legrand Well-Known Member

    Do you have power steering brackets for a 67 GS 400?
     
  4. DauntlessSB92

    DauntlessSB92 Addicted to Buick

    Is the rh core support rusted? Interested if it is solid. If you have the trunk trim still I am interested pending pictures. Thanks!
     
  5. priariecanary

    priariecanary Stacey

    Hello all,
    Sorry for not replying recently. I have been running around, not time to check the board or get over to my shop until now. Answers:
    Yes, I believe I still have the PS brackets. $25 shipped to lower 48 assuming everything fits into a medium USPS flat rate box.
    Core support is rusted through on both ends. Trunk trim is there but it's very pitted. I can send photos but I am guessing you won't want it. If you need pics, let me know.
    I am keeping the fuse box.
    Its still available. It is missing one of the radiator pads but its the right part for a big block car. I can send photos if you want. How about $25 plus actual shipping costs?
     
  6. Ant Legrand

    Ant Legrand Well-Known Member

    Thanks I will take the brackets! PM sent.
     
  7. 12lives

    12lives Control the controllable, let the rest go

    Great - pls send pics to my email - I will send a conversation as I do not see the link to send an email????o_O
     
    Last edited: Jul 19, 2017
  8. 66kooch

    66kooch Well-Known Member

    How much of the A/C stuff is left. I am looking to convert a car to A/C and need all items but vents
     
  9. priariecanary

    priariecanary Stacey

    i was just over in my shop but didnt see you wanted the top plate before i went over there. i will post pics by the weekend.

    AC system is completely GONE Ziggy took. the whole thing, every last nut and bolt.
     
  10. 12lives

    12lives Control the controllable, let the rest go

    OK - thanks!
     
  11. cobra2

    cobra2 Well-Known Member

    Looking for the knobs on the heater controls if you have them?
     
  12. priariecanary

    priariecanary Stacey

    heater knobs have been sold.
     
  13. cobra2

    cobra2 Well-Known Member

  14. cobra2

    cobra2 Well-Known Member

  15. 12lives

    12lives Control the controllable, let the rest go

    Hi Stacey - pls send a conversation with the info to pay for the top plate. Don't need pictures.
     
  16. priariecanary

    priariecanary Stacey

    All AC parts are gone. including clips for centre AC vent.
     
  17. priariecanary

    priariecanary Stacey

    OK guys I need to get this smelly heap of a car out of my shop. I am going top cut up the remains and haul it to the local steel recycler over the coming weeks. Most good parts have been sold.

    Ziggy has dibs on the steel dash.
    Positraction rear end is still available along with most of front suspension components.
    I am keeping the tilt steering, fan shroud, power window setup and wire harness. That is what I bought the car for in the first place.

    If you need anything let me know, I will post one more time before I haul the rest away.
     
  18. 12lives

    12lives Control the controllable, let the rest go

    Got the top plate - Thanks!!!
     
  19. priariecanary

    priariecanary Stacey

    Here is what 50 years of Minnesota winters and one determined man with an angle grinder can do to a 1967 GS400 in an afternoon. I basically had to butcher the poor thing to get it out of my shop. The frame was already rusted in half in a couple of places and I was able to use a pry bar to separate from the body from the mounts in a couple of spots since the floor was so rusty.

    I will be be taking the remnants of the body and frame to the metal recyclers tomorrow or Saturday. I will inventory what's left and post here in case there are any parts left over that anyone needs.

    IMG_0384.jpg
     
  20. 70buickboy

    70buickboy Well-Known Member

    Any chance you still have the vinyl top trim ? if so, what kinda shape is it in ?
     

Share This Page