455 A/C Sanden Compressor bracket

Discussion in 'The Big Chill' started by LonghornSS, Oct 19, 2013.

  1. LonghornSS

    LonghornSS Well-Known Member

    Ok gotcha. I did design this bracket similar to the 70-72 original Aluminum bracket but made the modifications to make it work with the 508 compressor. This makes it easier for those guys who do not have an original A/C bracket.
     
  2. LonghornSS

    LonghornSS Well-Known Member

    I have 3 more of these brackets Cut and ready to be Welded if anyone is interested. Turn around time right now is usually a couple of days.
     
  3. mazzy70

    mazzy70 Bill

    Does anyone know if this would fit properly on a big Buick? Would like to do this on a 76 Electra if everything fit properly.
     
  4. LonghornSS

    LonghornSS Well-Known Member

    Hello Everyone, I just sold the last of another round of brackets Recently. Let me know is there is any interest and I can get another set of brackets going from the Laser shop.
     
  5. Chuck Striker

    Chuck Striker New Member

    I PM'd you but I am writing here to add to the forum. I have a 71' Lesabre with a 350 that I recently purchased a vintage air system for to install this winter. This forum discusses using your bracket design on a 455 but I was wondering if it would work on a 350? I know these 2 engines are completely different blocks but do share some interchangeability in some components. With me not being a expert in all things Buick, I am writing here to see if the bolt patterns for accessories on a 350 would be compatible. Would love to purchase one of your brackets if I could use it as the aftermarket industry has really ignored us Buick owners in many categories, especially this one. Thanks!
     
  6. LonghornSS

    LonghornSS Well-Known Member

    Does this bracket Fit a 350 Buick Yes.
    Just keep in mind I have designed this bracket to work in place of the original Alternator mount on a heater car, or it completely replaces the bracket of an A/C car. They were designed specifically on a 70 Skylark 455. But I have personally installed them on a 68 350 skylark as well. If your car did not come with A/C pulleys you will have to be sure you have the proper ones because the belt routing for this bracket is the same as the factory A/C cars. I do outline proper belt lengths with factory pulleys in the instruction packet if anyone purchases a bracket.

    I cannot speak personally to the fitment of the bracket on any other model of car, be it Riviera, Le sabre or other wise but I can not see there being to much issue with them fitting anything else. I did have one guy install one on his hotrod!
     
  7. cruzn57

    cruzn57 cruzn57

    DSC07779.JPG finally put the new motor in, and slowly doing the add ons,
    wanted to use sanden 508 compressor, and still use orig brackets,
    notched the orig bracket, made spacers so there is no load on the comp ears,
    not final, need to make proper spacers, but belt aligns, and stays on ,
    now fabbing a tension arm,
     
  8. BobsGS

    BobsGS Member

    Any ideas on Vintage Air install on 69 GS 400 need brackets - thks
     
  9. LonghornSS

    LonghornSS Well-Known Member

    I have Personally installed these brackets on the 350 and 455. I do not believe cylinder head is any different on the 400. The bracket bolts strictly to the head. I cannot speak to any belt alignment/pulley setup on the 400 engine.
     
  10. BobsGS

    BobsGS Member

    I found Nostalgia Air set up - I need a A-6 original type bracket to attach
     
  11. BobsGS

    BobsGS Member

     
  12. BobsGS

    BobsGS Member

    I’m looking for a A-6 original style bracket to hook up a=c anyone have a lead
     
  13. BobsGS

    BobsGS Member

     
  14. BobsGS

    BobsGS Member

    I’m looking for A-6 type bracket for a/c install could find one for Vintage Air 69 Buick GS400 Non a/c
     
  15. LonghornSS

    LonghornSS Well-Known Member

    Bob, you may have better luck finding that bracket in the parts for sale section, or parts wanted section of this forum, or try your luck finding an original compressor bracket on eBay.
     
  16. BobsGS

    BobsGS Member

    Hi looking for brackets for a/c install Type A for 69 GS400
     
  17. LonghornSS

    LonghornSS Well-Known Member

    For anyone interested in one of these brackets, please send me a PM. I get email notifications of new messages. I am not constantly monitoring this thread or the messages on my profile. Starting a conversation or PM is the best way to ensure I see your request.
    Thanks again
     
  18. Jeff4848

    Jeff4848 New Member

    I'm definitely interested in one.
     
  19. Jeff4848

    Jeff4848 New Member

     
  20. Jeff4848

    Jeff4848 New Member

    Any word on the bracket?
     

Share This Page