WTB: Manual Trans & Parts for Swap

Discussion in 'Parts wanted' started by StKing, Apr 24, 2019.

  1. StKing

    StKing Well-Known Member

    Feeling the need to row some gears.

    Looking for a manual trans to swap to from my th400. I need a trans and all parts necessary to do the swap.
    Considering m21, m22, Richmond 5sp, or t56.

    Let me know what you have and where you're located, I'm in Los Angeles.

    Thank you,
    Shaun
     
  2. telriv

    telriv Founders Club Member

    It would be nice to know the yr. make & model. Should end up with more replies to your wants.
     
  3. StKing

    StKing Well-Known Member

    Ah, I knew I forgot something. 1970 Gs 455.
     
  4. BrianTrick

    BrianTrick Brian Trick

    Are you looking to make it concours correct,or just function over fashion?
     
  5. Brent

    Brent Founders Club Member

    I have a Richmond 6 speed with a long shifter, I may have a bellhousing and flywheel that I could possibly include as well. The big plus with Richmond 5 or 6 speed is they fit without having to butcher the floor.
    Thanks
    Brent
     
  6. StKing

    StKing Well-Known Member

    Function over fashion.
     
  7. StKing

    StKing Well-Known Member

    Interested, would you prefer to email or direct message? Id like to know how many miles are on the tranny and how much you'd like to get. Ya, the big reason behind looking at the Richmond was so I didn't have to cut up the floor too much.
     
  8. Brent

    Brent Founders Club Member

    Just message me on here on the board. The trans has 2,000 miles at most, probably less. It has the AA ratios, 3.28, 2.13, 1.57, 1.24, 1:1, .76, very close ratios. Don't really need or want to sell it, but it's been sitting in the shed for 2 years not doing anyone any good. lol
    Thanks
    Brent
     
  9. 41speciman

    41speciman Well-Known Member

    How much just on tranny
     
  10. StKing

    StKing Well-Known Member

    Great, DM sent.
     
  11. StKing

    StKing Well-Known Member

    Bump. Still looking for manual trans and swap parts. Anyone?
     
  12. flynbuick

    flynbuick Guest

    You know the crankshaft has to come out for installation of a bushing or bearing? This project is going to be a 3-5K experience depending on the trans used.
     
  13. they make adapter pilot bushings to put in an automatic crankshaft so you don't have to pull it out and have it machined
     
    tubecatgs likes this.
  14. tubecatgs

    tubecatgs Finally a 4 speed......

    They do? Do you know who sells them? Thanks
     
  15. tubecatgs likes this.

Share This Page