Hey Mike... dropped the 455 Block and Heads off at Terry's engine rebuilders in Green Bay yesterday after sitting for 3 weeks in the back of the local shop... It was getting the plugs knocked out and ready for the hot tank before I left the place! The initial visual "Looks OK" was what Terry said. We'll confirm after the wash and sonic check today! Thanks, Bill in TR
Yo Mike.. So the 455 was perfect and is now cleaned, bored, and honed at +.040 OS. The sounding on the rear side of #6 proved a .140" wall so after the bore was at .120" Thanks fer holding out! Bill
No problem Bill, I have one here that is 30 over and the back of 6 is at .103. Not really feeling that one. Mike