I have A LOT of stuff for sale, so here goes: all parts are best reasonable offer + shipping, where possible... 69 parts: 69 GS hood with decent scoops: $400 69 front fenders- VERY solid $300 each 69 rear bumper- original chrome- straight, surface rust on back side, chrome is great- $400 SOLID 69 skylark custom 2 door body shell, frame, and doors, with clean Ohio title- RUST FREE quarters, just very small amounts of surface rust on frame and body- VERY CLEAN start to a nice car: $1500 69 GS400, clean Ohio title, rough car, lots of typical rust, but possibly saveable. Has a lot of mud and rust- it's definitely an Ohio car, but it was a real GS (paint was Antique gold). Frame seems pretty solid, floors are starting to get bad. Lots of surface rust, and quarters will need to be replaced. NO FRONT CLIP OR DRIVE TRAIN $300 Buick 14" wheels with center caps in good shape- $??? a set of Olds ralley wheels with trim rings in ok shape lots of motor stuff (all disassembled)- 2 late model 455 blocks at standard bore 1 71 or 72 block @ .030" over 1 430 standard bore block 1 400 block cranks and rods from said blocks all components from above motors, brackets, rods and pistons, oil pans, front covers, etc. Let me know what you need... 73 800 cfm Buick q-jet- good rebuildable core $50 nice used 296-08H cam (purchased off this board from Jim Weise) $50 2 sets of 68 430 heads in good used condition, $100 pair There is more, but this is all from memory. If you don't see something, ask and I'll check on it.
I may be into those cams, do you have the matching lifters for the 296? Is that a Poston 107? Do you have the cam card on it?
What does it look like? I will need a little help with identifying some of these parts. Thanks for the interest.
The 296 had lifters with it, but the lifters got mixed up, so I wouldn't want to sell them with the cam. The 107 has never been run, to the best of my knowledge.
As for the 296, that's a little bummer about the lifters getting mixed up. Is the 107 a TA or Poston cam and does it have the card?
im guessing Steve?? i'll take the 69 interior as long as the dash pad and back seat are nice. may also be interested in the GS and the 69 back bumper give me a call 440 567 9051 or send me your # and i'll call you.
I'll have to check for the card when I get home. I think it had one with it. I don't know the origin of the cam... I think it might have been ground by Schneider (if I'm remembering right). It might be from one of the Buick vendors, since they don't grind their own cams.
Right, pending further info on the 107, I will pass on the 296 but still in for the 107. Thanks. MarkO
Yeah Doug, it's me. Still need those fenders? :Brow: I also have a couple of really nice GS door panels that match that interior, but I would want extra for those (there are some included that are power window types with the switches, but not as nice).
Can you put me in line and send pics of the 69 rear bumper and GS hood or call me at 260-615-5567 email at calvindubose@verizon.net
Calvin, I just talked to Doug and he might want the rear bumper. I have a driver quality (pretty nice, actually) front bumper that I would sell you, if you're interested.
Im in the middle of a repaint on my 69 Skylark in my avitar can you send pics of the front bumper and the GS hood
sure... it might take a couple days, but I'll get them to you. If Doug passes on the back bumper I'll put you in line next.
I do have one. I will clean it up and post a pic up ASAP. I have stuff EVERYWHERE and it's going to take some time to go through it all.
